6.7L Cummins Forum

Anyone have any experience with this setup? http://www.whitenight.com/ Seems like a great setup and the price is around $120 and since it has a separate switch you could tap into it and put a switch in the cab.


FITS VIRTUALLY ANY VEHICLE with a hitch or step bumper <LI class=orange>Unique rear lighting system - Patented and Trademarked Technology
Plug N' Go Wiring Adapter for 7-pin trailer outlets ELIMINATES wire splicing!
Two powerful 55 watt high output halogen lamps
Activates automatically when vehicle is in reverse
Produces 130,000 candlepower of light
Toggle switch on unit allows manual operation
Mounts on receiver of most class 1 thru 4 trailer hitches
Fixed mount model allows full use of hitch for towing
Sturdy high impact case
Easy to install and compact in size
No drilling required

__________________

2007.5 Dodge Ram 3500 HD,QC, 6.7L Cummins, 6speed Auto, 4X4, Bighorn Edition.
Click for installs: Carr Steps PML Diff Cover Edge Juice with Attitude Volant Intake Hankook ATM RF10

I have seen them, If you change your hitch it will be difficult because of the way it mounts. I do because I am too cheap to get one of the hitches that you can change the height of. It sure looks great and a neat idea. I installed a pair of fog lights under the bumper and have already installed a 50 Amp power tap (Relay set up) under the hood for the front lights and the air compressor. The biggest problem I had was where to put the switches, Left inside of the flip down cup holders next to the trailer brake controller. The controller is mounted to the top on the ash tray with some brass cabinet hinges, looks good and is functional. I'll try to post some pictures of how I did it.

__________________
07.5 3500 Quad, SRW, 4X4, Laramie, Leathered, Dark Metallic Gray, 6.7, 68RFE, 20K Reese, Ride Rite's, 2 Viair air compressors, Bully steps, Kleinn Locomotive air horns (5 in all), Billet polished locking fuel door, 'A' pillar mount Auto Meter Pryo, PML X-deep trans pan
06 Durango 285 RL 5'er Lifted by KZ

Here is a thought and the route I am going. I am also in the need for additional rear lighting ....

Defiant Dodge Truck Rear light Support Brackets 03-08 Ram 1500,2500,3500 2WD & 4WD

Gives me the flexibility to use the lights and bulbs I want and aim there where needed

Cheers,
Roberto

__________________