6.7L Cummins Forum

I'm removing my Woodhouse sleeper berth and need some help with the jigsaw puzzle, basicly everthing is in pieces. Do any of you have instructions on how to assemble?

Thanks,
-Allen

__________________
1993 Mustang Supercharged Coupe
2009 Dodge 3500 4x4 Dually 6-Speed Manual

Allen I'm really sorry I didn't see this earlier.

1. Carefully lower the door glass into the door through the window opening.
2. Rotate the door glass into position and engage it to the window regulator.
3. Position the front glass run channel (1) into the door through the door panel opening.




4. Install the two bolts (1) that secure the front glass run channel to the door. Tighten the bolts to 10 N·m (89 in. lbs.).



NOTE: Quad Cab model shown, Mega Cab models are similar.

5. Install the two nuts (1) that secure the door glass (2) to the window regulator (3) through the sight window (4) and the speaker opening (5). Tighten the nuts to 10 N·m (89 in. lbs.).
6. Lower the door glass into the door and remove the manual window crank or disconnect the electric window switch from the door wire harness (depending on application).
7. Install the waterdam
8. Install the inner belt molding

Attached Thumbnails

   

__________________

2007.5 Dodge Ram 3500 HD,QC, 6.7L Cummins, 6speed Auto, 4X4, Bighorn Edition.
Click for installs: Carr Steps PML Diff Cover Edge Juice with Attitude Volant Intake Hankook ATM RF10