6.7L Cummins Forum

I have been noticing the doors rattling more when hitting the bumps, more so on the passenger side. It seems like it is coming from inside the door because I see the panel moving, but sounds like the door latch with how loud it is. Does anyone hear notice excessive door rattling or knows what could be causing this?

__________________
2008 Dodge 2500HD 6.7L 4X4 Laramie
Edge insight, Amp tailgate step, 4" Boss Bars, rear air bags with compressor, spray in bed liner

None here.

__________________
07.5 3500 Quad, SRW, 4X4, Laramie, Leathered, Dark Metallic Gray, 6.7, 68RFE, 20K Reese, Ride Rite's, 2 Viair air compressors, Bully steps, Kleinn Locomotive air horns (5 in all), Billet polished locking fuel door, 'A' pillar mount Auto Meter Pryo, PML X-deep trans pan
06 Durango 285 RL 5'er Lifted by KZ

No not I. My last truck had a terrible rattle and I just about went insane trying to figure it out. What I discovered was the Queen had placed a container of Tic Tacs in the door compartment and then placed her gloves on top of them. To this day she still wonders what happened to them Tic Tacs...............

__________________

2007.5 Dodge Ram 3500 HD,QC, 6.7L Cummins, 6speed Auto, 4X4, Bighorn Edition.
Click for installs: Carr Steps PML Diff Cover Edge Juice with Attitude Volant Intake Hankook ATM RF10

I had a similar experience as Squid. I bought my present truck new, and was driving down the freeway enjoying the experience. All of a sudden a rattle went through the cabin. I looked and poked, (as much as possible at 75-80mph), and could NOT find the source of that d@mned rattle. D@mned truck! When I couldn't take it for another minute, I pulled over, determined to find the rattle or tear the truck apart right then and there. MAN WAS I MAD! After searching for about a minute, I started to laugh like a nut. I had dropped a Maglight into the glove box and forgot to wrap it in the shop towels I always keep handy. Once I padded the flashlight, the rattle magically disappeared, never to return.
The object lesson behind all of this: Look for the simple stuff before running to the dealer or spending a ton of money...........

Those are both funny. I will start with the stuff in the truck and not take the door apart.

__________________
2008 Dodge 2500HD 6.7L 4X4 Laramie
Edge insight, Amp tailgate step, 4" Boss Bars, rear air bags with compressor, spray in bed liner

Mine does the same thing...Rattle is coming from the door lock post...Both doors do it, more so on the passenger side.

__________________

7.5 3500QC 6.7CTD 68RFE Build date June 2007
Superchips tuner 3808, Boost/EGT Laser Gauge, Airaid cold intake

Have you ever tried to fix it?

__________________
2008 Dodge 2500HD 6.7L 4X4 Laramie
Edge insight, Amp tailgate step, 4" Boss Bars, rear air bags with compressor, spray in bed liner

Nope, just turn the music on louder

__________________

7.5 3500QC 6.7CTD 68RFE Build date June 2007
Superchips tuner 3808, Boost/EGT Laser Gauge, Airaid cold intake

__________________

2007.5 Dodge Ram 3500 HD,QC, 6.7L Cummins, 6speed Auto, 4X4, Bighorn Edition.
Click for installs: Carr Steps PML Diff Cover Edge Juice with Attitude Volant Intake Hankook ATM RF10

I figured out the door panel is the problem now, it sounds like it is rubbing on it’s self (after I removed the mosquito repellent). I was thinking about removing the panel to see if anything could be done about it.Has anyone pulled the door panel off and if you have can you explain? I have pulled plenty of them off but they never seem to go back on as good.

__________________
2008 Dodge 2500HD 6.7L 4X4 Laramie
Edge insight, Amp tailgate step, 4" Boss Bars, rear air bags with compressor, spray in bed liner