View Single Post
  #1 (permalink)  
Old 12-22-2007, 08:04 PM
Squid's Avatar
Squid Squid is offline
Head Flunky
 

Join Date: Sep 2007
Location: South Central Kansas
Posts: 1,590

Default Cummins 6.7L G30 Recall

Had this done a couple of weeks ago. As of Feb 15 2008 the PCM Flash is now at Revision X.


2007 - 2008
(DH/D1) Dodge Ram 2500/3500 Pick Up Truck

NOTE: This recall applies only to the above vehicles equipped with a


6.7L diesel

engine (“A” in the 8th VIN position) built through August 20, 2007 (MDH 082019).
The On-Board Diagnostic (OBD) system on about 74,000 of the above vehicles may
not detect a failed oxygen sensor or illuminate the Malfunction Indicator Light as
required. In addition, the OBD system may cause these trucks to fail an Inspection
Maintenance (Readiness) test and may not store mileage as required for certain
transmission faults.


The Oxygen Sensor Module must be replaced and the Engine Control Module

(ECM) must be reprogrammed (flashed).
NOTE: The new software will also improve vehicle driveability and reduce the

potential for exhaust soot accumulation in the vehicle’s particulate filter.
Attached Files
File Type: pdf g30 recall.pdf (93.4 KB, 25 views)
__________________

2007.5 Dodge Ram 3500 HD,QC, 6.7L Cummins, 6speed Auto, 4X4, Bighorn Edition.
Click for installs: Carr Steps PML Diff Cover Edge Juice with Attitude Volant Intake Hankook ATM RF10

Last edited by Squid; 02-15-2008 at 05:37 PM..
Reply With Quote
Links